1. There are various types of dust collector equipment, with different models and specifications. The structural performance and working characteristics of each model are also different. Before use, we need to read the analysis instructions carefully to avoid improper use methods. Damage to industrial dust collectors and endangering the personal safety of users.
2. The ambient temperature when using ordinary industrial dust collectors cannot exceed 40 degrees, and the workplace cannot be higher than 1,000 meters above sea level.
3. Dry
Dust Removal Equipment is not allowed to absorb water, and dust removal equipment cannot be operated with wet hands.
4. Connect the ground wire to ensure the safety of electricity.
5. When using an industrial dust collector equipped with an automatic cord winding device, just pull out the power cord to a length sufficient for use. Do not pull over the power cord. If you see yellow or red marks on various power cords, you must Stop pulling out immediately to prevent pulling the power cord too far.
6. Do not overuse expansion and bending of industrial vacuum cleaner hoses, or frequent folding, which will affect the life of industrial vacuum cleaner hoses.
7. Check whether the power plug and power cord of the dust collector equipment are damaged. Electric leakage will burn out the industrial vacuum cleaner motor.
8. When moving the
Dust Removal Device, be careful not to be hit to prevent damage to the barrel.
9. The machine should be placed in a ventilated and dry place when not in use. For industrial vacuum cleaners that do not support long-term continuous management work, the continuous working time should be controlled within the working unit time supported by an industrial dust collector.
10. If the main engine of the dust removal equipment becomes hot or smells burnt, or the industrial dust collector vibrates abnormally, it should be shut down immediately for maintenance. The industrial dust collector should not be used overloaded.
Contact Now
