Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Industrial sludge treatment plate and frame filter press
2390~18220USD
Brand:senjie
Min. Order:1 Piece/Pieces
Supply Ability:Available for delivery starting from 100 pieces per month
Filter press structure As shown below: Product advantages of filter press: 1. Adopting the world's leading TPE diaphragm technology, it is environmentally friendly, has a long life, has good stability and versatility, and is suitable for a variety...
Multifunctional automatic dewatering wine filter press
3251~4680USD
Brand:senjie
Min. Order:1 Cubic Meter
压滤机的结构由三部分组成: 折叠机架 机架是压滤机的基本部件,两端有止推板和压头。两者由两侧的大梁连接。大梁用于支撑滤板、滤框和压紧板。为了满足先进的卫生要求,架子需要用不锈钢覆盖。不锈钢熔覆技术可以作为参考,其质量可以满足欧洲客户的需求。 A、止推板:连接支架,将压滤机一端置于基础上。厢式压滤机推力板中部为进料口, 四个角有四个孔。上两个角的孔为洗涤液或加压气体的入口,下两个角为出口(底流结构或滤液出口)。 b. 压紧板:用于压紧滤板和滤框。两侧滚轮用于支撑压紧板在梁轨上滚动。...
screw type press sludge dehydrator
5840~9870USD
Brand:senjie
Min. Order:1 Piece/Pieces
Supply Ability:50 pieces available per month
System operating procedures of the screw stacking machine. Before working on the screw stacking machine, check: turn on the electrical and pneumatic switches, open the clean valve, check related matters, please follow the following steps: turn on...
Industrial volute screw sludge dehydrator filter press
USD 3158 - 3468 / Piece/Pieces
Working principle of screw stacking machine: The working principle of the snail stacking machine is divided into three parts: concentration, dehydration, and self-cleaning. Concentration part of snail stacker: When the spiral push shaft rotates, the...
Easy maintenance sludge dewatering screw filter press
3158~6874USD
Min. Order:1 Piece/Pieces
The snail stacking machine, also known as the snail stacking sludge dehydrator, deslimer, sludge squeezer, and mud press, is a new type of sludge solid-liquid treatment equipment that has emerged in recent years. It is one of the four popular sludge...
Fully automatic hydraulic chamber diaphragm filter press
5798~8570USD
Brand:senjie
Min. Order:1 Piece/Pieces
As the output of the customer's factory continues to increase, the load on the plate and frame filter press is getting larger and larger, and the frequency of equipment failure is higher. Further analysis and summary are needed to better maintain...
24-hour fully automatic belt filter press
1580~6980USD
Brand:senjie
Min. Order:1 Piece/Pieces
Supply Ability:50 units available per month
The structure of the filter press consists of three parts: folding rack The frame is the basic component of the filter press, with thrust plates and pressure heads at both ends. The two are connected by girders on both sides. The girders are used to...
Filter press for high purity solids from sludge
1580~6980USD
Brand:senjie
Min. Order:1 Piece/Pieces
Supply Ability:50 units available per month
The structure of the filter press consists of three parts: folding rack The frame is the basic component of the filter press, with thrust plates and pressure heads at both ends. The two are connected by girders on both sides. The girders are used to...
Fully automatic high-pressure membrane filter press
2560~8954USD
Brand:senjie
Min. Order:1 Piece/Pieces
Supply Ability:50 pieces available per month
The structure of the filter press consists of three parts: folding rack The frame is the basic component of the filter press, with thrust plates and pressure heads at both ends. The two are connected by girders on both sides. The girders are used to...
Small slurry water recovery laboratory filter press
2560~8954USD
Brand:senjie
Min. Order:1 Piece/Pieces
Supply Ability:50 pieces available per month
The structure of the filter press consists of three parts: folding rack The frame is the basic component of the filter press, with thrust plates and pressure heads at both ends. The two are connected by girders on both sides. The girders are used to...
Fully automatic plate and frame sludge filter press
2103~6750USD
Brand:senjie
Min. Order:1 Piece/Pieces
Supply Ability:Available for delivery starting from 50 pieces per month
环保型压滤机的结构由三部分组成: 折叠机架 机架是压滤机的基本部件,两端有止推板和压缩头。两者由两侧的大梁连接。大梁用于支撑滤板、滤框和压紧板。为了满足先进的卫生要求,架子需要用不锈钢覆盖。不锈钢熔覆技术可以作为参考,其质量可以满足欧洲客户的需求。 A、止推板:连接支架,将压滤机一端置于基础上。厢式压滤机推力板中部为进料口。 四个角上有四个孔。上两个角的孔为洗涤液或加压气体的入口,下两个角为出口(底流结构或滤液出口)。 b. 压紧板:用于压紧滤板和滤框。两侧滚轮用于支撑压紧板在梁轨上滚动。...
Industrial electro-hydraulic plate and frame filter press
3589~9870USD
Brand:senjie
Min. Order:1 Piece/Pieces
Supply Ability:Available for delivery starting from 50 pieces per month
Traditional environmentally friendly mechanical dehydration equipment such as belt filter presses, centrifuges and ordinary filter presses can only dewater sludge to a moisture content of about 80%, while sludge with a water content of 80% is still...
LET'S GET IN TOUCH
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.